Table of Contents
Advertisement
Figure 59. Installing the slim optical drive blank
Next steps
1.
Install the optical drive
2. Follow the procedure listed in
NVDIMM-N battery
Removing the NVDIMM-N battery
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
CAUTION:
To prevent data loss, ensure that your system is turned off and that the indicator LEDs on the
battery are Off before removing the NVDIMM-N battery.
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing
or removing a battery.
3. Remove the NVDIMM-N battery cage.
Steps
1. Disconnect the cables from the NVDIMM-N battery.
2. Using the Phillips #2 screwdriver, loosen the screw securing the NVDIMM-N battery.
3. Holding the edges, lift the battery from the NVDIMM-N battery cage.
cage.
After working inside your system
Safety instructions
Before working inside your system
on page 28.
on page 27.
on page 28.
Installing and removing system components
69
Advertisement
Table of Contents
