Installing A Backplane - Dell Olympus O-T600 Installation And Service Manual

Figure 97. Removing a backplane
Next steps
1. Install a backplane.

Installing a backplane

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Use the hooks at the base of the system as guides to align the hard drive backplane.
2. Lower the hard-drive backplane into the system till the release pin locks in place, securing the hard drive backplane to the
system.
3. Connect the data, signal, and power cables to the backplane.
108 Installing and removing system components
Safety instructions
Before working inside your system
on page 27.
on page 28.