Figure 123. Installing the GPU power interposer board
Next steps
1.
Install the system
board.
2.
Install the
PSUs.
3. Follow the procedure listed in
Removing the main power interposer board
Prerequisites
CAUTION:
To prevent damage to the main power interposer board (PIB), you must remove the power supply
units (PSUs) from the system before removing the PIBs.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the
PSUs.
4.
Remove the system
board.
5. If installed,
remove the GPU
Steps
1. Disconnect all the power cables from the main PIB.
2. Using the Phillips #2 screwdriver, remove the screws that secure the main PIB to the system.
3. Lift the main PIB out of the system.
Figure 124. Removing the main PIB
128
Installing and removing system components
After working inside your system
Safety instructions
Before working inside your system
PIB.
on page 28.
on page 27.
on page 28.