Table of Contents
Advertisement
Figure 47. Installing a middle cooling fan
Next steps
1. Follow the procedure listed in
Removing the right external fan
Prerequisites
NOTE:
Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise
utmost care while removing or installing cooling fans.
NOTE:
The procedure to remove the left external fan is similar to removing the right rear fan.
1. Follow the safety guidelines listed in
2.
Remove the GPU air
shrouds.
3.
Remove the air
shroud.
Steps
1. Disconnect the fan cable from the system board.
2. Using the Phillips #2 screwdriver, loosen the captive screws that secure the fan to the system.
3. Lift the fan away, while guiding the fan cable through the cable vent.
58
Installing and removing system components
After working inside your system
Safety instructions
on page 28.
on page 27.
Advertisement
Table of Contents
