Table of Contents
Advertisement
Figure 85. Removing the optional NVLink bridge cover
2. Install the NVLink bridge by placing the bridge between the cards and gently pressing downwards until firmly seated with no
gap.
NOTE:
The NVLink bridge can only be installed in one orientation. If it does not fit easily, turn the NVLink bridge around
to install it on the GPU cards.
Figure 86. Installing the optional NVLink Bridge
Next steps
1. Replace the left and right air shrouds and
2. If removed,
install the air
3. Follow the procedure listed in
M.2 SSD module
Removing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the air
shroud.
4. Remove the BOSS card.
NOTE:
Removing the BOSS card is similar to the procedure for removing an expansion card riser.
install the expansion card holders
shroud.
after working inside your
Safety instructions
Before working inside your system
from the NVLink bridge kit.
system.
on page 27.
on page 28.
Installing and removing system components
99
Advertisement
Table of Contents
