Figure 98. Installing a backplane
Next steps
1. If removed,
install the middle cooling fan
2.
Install the drives into their original
3. Follow the procedure listed in
Backplane cabling
Figure 99. 2.5 inch x32 SAS/SATA to internal PERC
1. 2.5 inch x 16 backplane (flex bay)
3. SAS cable (BP flex bay: J_SAS_B0 to internal PERC card)
assembly.
slots.
After working inside your system
on page 28.
2. SAS cable (BP flex bay: J_SAS_A0 to internal PERC card)
4. internal PERC card
Installing and removing system components
109