Table of Contents
Advertisement
Steps
Align the PSU blank with the PSU slot and push it into the PSU slot until it clicks into place.
Figure 37. Installing a power supply unit blank
Next steps
1. Follow the procedure listed in
Removing a AC power supply unit
Prerequisites
CAUTION:
The system needs one power supply unit (PSU) for normal operation. On power-redundant systems,
remove and replace only one PSU at a time in a system that is powered on.
1. Follow the safety guidelines listed in
2. Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cable
from the strap on the PSU handle.
Steps
Press the orange release latch and slide the PSU out of the system by using the PSU handle.
Figure 38. Removing a power supply unit
Next steps
1.
Install the AC
PSU.
After working inside your system
Safety instructions
on page 28.
on page 27.
Installing and removing system components
45
Advertisement
Table of Contents
