Table of Contents
Advertisement
CHAPTER 5: CONFIGURING THE BUILT-IN NOTIFICATIONS
In this example picture, the virtual sensor's status will be critical when any of the Humidity/Temperature/Dry Contact
sensors will have a high/low/critical status.
NOTE: If you connect an expansion board, you'll be able to select sensors from the expansion board also.
5.5.2 SNMP GET
With SNMP Get sensor, you can get a value from any SNMP device.
NOTE: A custom string return value is not supported.
Host IP: The IP address of the unit on which you wish to perform an SNMP Get command.
SNMP Version: v1 works with most devices; you can also select v2c and v3.
SNMP Read Community: The SNMP password of the unit, default is usually "public."
94
FIGURE 5-73. SNMP GET SENSOR TYPE
FIGURE 5-74.
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
