Relay Action Setup - Black Box EME160A-UC User Manual

CHAPTER 5: CONFIGURING THE BUILT-IN NOTIFICATIONS

5.2.5 RELAY ACTION SETUP

You can use the Relay Action to control a relay when a sensor reaches a certain threshold.
NOTE: The relay needs to be connected to the unit before it can be configured.
If you click on the Finish and Setup Notification button, this will launch the Link Notification Wizard where you can use
the new action for making a notification.
NOTE: If you've connected an expansion board, you can choose it from the Unit/Expansion selection menu as shown
next.
FIGURE 5-19. RELAY INFORMATION
FIGURE 5-20. UNIT/EXPANSION SELECTION MENU
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
65