Table of Contents
Advertisement
CHAPTER 2: OVERVIEW
2.3 WHAT'S INCLUDED
Your package should contain the following items. If anything is missing or damaged, contact lack Box Technical
Support at 877-877-2269 or techsupport@blackbox.com
Š (1) Alertwerks Gateway
Š (1) In-line Power Supply (Input: 100-240VAC, 50/60Hz, 2A - Output: 5VDC, 3A – C13 receptacle)
Š (1) Power Cord, C14 to NEMA 5-15P
Š (1) RJ-45 to RJ-45 crossover cable, 5-foot (1.5-m)
Š (1) CD (Manual)
2.4 HARDWARE DESCRIPTION
2.4.1 BACK PANEL: PORTS
Port numbering starts from the power connector on the unit: the closest port to the power connector is Port 1 and
closest to the Ethernet interface is Port 4.
You may connect AlertWerks sensors to any available ports.
CAUTION: If you're using analog pins on the sensor ports (with manually on-lined DCV sensors, and pin 7 of the RJ-45
connector), make sure that the voltage doesn't exceed 3 Volts. Otherwise, you might damage the unit!
NUMBER IN FIGURE 2-1
1
2
6
FIGURE 2-1. BACK PANEL
TABLE 2-1. BACK PANEL COMPONENTS
COMPONENT
(4) Sensor ports
(1) Barrel connector
1.877.877.2269
1
DESCRIPTION
Connect AlertWerks sensors
Connect for power supply
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
2
Advertisement
Table of Contents
