Relay Sensor - Black Box EME160A-UC User Manual

CHAPTER 4: WEB GRAPHICAL USER INTERFACE (GUI)

4.6.2 RELAY SENSOR

Click on the sensor port where the sensor is connected to open the sensor's configuration.
NOTE: Another way of accessing this page is to click on the sensor from the Summary page.
Š Boot Up State: You can change the state of the relay when the unit starts. The default is Off.
Š Description of Status When Relay Off: This field is the custom description, which will be displayed in the Relay Status
field when the relay state is off. The same text is listed as one of the relay actions used to turn off the relay. Examples
for this field are Close Door, Turn Pump Off, Turn Light Off, etc.
Š Description of Status When Relay On: This field is the custom description, which will be displayed in the Relay Status
field when the relay state is on. The same text is listed as one of the relay actions used to turn on the relay. Examples
for this field are Open Door, Turn Pump On, Turn Light On, etc.
48
FIGURE 4-60. RELAY SENSOR SCREEN
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269