CHAPTER 5: CONFIGURING THE BUILT-IN NOTIFICATIONS
There's also support for Dual Sensors FlipFlop logic.
In this mode, you can choose two sensors for monitoring.
It has AND relation between them, and only changes the virtual sensor's state if there's an exact match for these
statuses.
5.5.5 SNMP TRAP RECEIVER
The SNMP Trap Receiver type will check three parameters before setting a value for the virtual sensor.
These three parameters are the IP Address, the sensor's OID, and the Trap sub-type.
100
FIGURE 5-87. TRIGGER LOGIC MENU
FIGURE 5-88. DUAL SENSORS FLIPFLOP LOGIC EXAMPLE
FIGURE 5-89. SNMP TRAP RECEIVER SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269