Table of Contents
Advertisement
CHAPTER 3: CONFIGURATION
3.1.2 HOW TO ADD A SECONDARY IP ADDRESS TO THE COMPUTER'S LAN CARD
You can do this via the GUI by opening the LAN connection's properties:
Or open an Administrator Command Prompt (CMD) window and type:
netsh interface ipv4 add address "Local Area Connection" 192.168.0.2 255.255.255.0
The above command adds the IP Address 192.168.0.2 (with Subnet Mask 255.255.255.0) to the connection titled "Local Area
Connection."
You will then be able to connect to the unit with its default IP.
NOTE: The secondary IP address is permanent for the LAN connection; don't use it if you only need it once. Instead, use the
routing table method above.
10
FIGURE 3-1. TCP/IP ADDRESSES SETTING SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
