Table of Contents
Advertisement
CHAPTER 4: WEB GRAPHICAL USER INTERFACE (GUI)
This will start the Upgrade page. Choose the firmware file from your PC and click on Upgrade to start the process.
The firmware file for the AlertWerks Gateway has the following format:
spplus-1.0.1804.bin
- where 1.0.1804 is the build version.
First the file will be uploaded to the unit.
Then the upgrade process will run. The whole process can be done in a few minutes.
The Power/Ethernet LED will be red during the upgrade.
54
FIGURE 4-72. UPLOADING... SCREEN
FIGURE 4-73. UPLOADING... SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
