Table of Contents
Advertisement
CHAPTER 5: CONFIGURING THE BUILT-IN NOTIFICATIONS
A different trap message is sent for each sensor type such as temperature, humidity, and switch. The trap messages
include VarBind fields that include the current sensor status (Normal, Critical High, Warning High, Critical Low, Warning
Low, and sensorError), the current sensor value, the level exceeded, the sensor index, the sensor name, and the sensor
description.
You can enable or disable specific fields if you choose the customTypeTraps from the drop-down list.
These parameters set the maximum number of times to send the trap notification and the time interval between each
notification.
If you click on the Finish and Setup Notification button, this will launch the Link Notification Wizard where you can use
the new action for making a notification.
FIGURE 5-36. SNMP TRAP TYPE SCREEN
FIGURE 5-37. RETRY SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
75
Advertisement
Table of Contents
