Table of Contents
Advertisement
CHAPTER 4: WEB GRAPHICAL USER INTERFACE (GUI)
4.4 GENERAL OPTIONS FOR ALL SENSORS
You can change the following general options for all sensors: Disable Auto Sense, Choose Sensor Type, Offline a
Sensor and Smart Sensor Recovery.
4.4.1 DISABLE AUTO SENSE
Click on the Auto Sense button to turn off the automatic sensor detection for a port.
This feature is useful if you want to simulate a sensor (this works for Relay type sensors) or to prevent a sensor from
going into offline state.
NOTE: The sensor will be in "sensor error" state if the unit can't get any reading from the sensor.
FIGURE 4-46. AUTO SENSE BUTTON
FIGURE 4-47. AUTO SENSE SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
39
Advertisement
Table of Contents
