CHAPTER 5: CONFIGURING THE BUILT-IN NOTIFICATIONS
If it is set to bothTypeTraps(3), device will send the trap two times, specific value will show sensor type and show sensor
type and port (Specific value of Motion Sensor port 5 is 305 and 30).
If it is set to statusTypeTraps(4), specific value is up to status of sensor (spSenUnknownStatus(51),
spSenNoemalStatus(52), spSenWarningStatus(53), spSenCriticalStatus(54)).
With the Switch Sensor Style you'll need to specify the Normal State Value. Value 2 means that the sensor's status is
normal so far.
102
FIGURE 5-92. SELECT SWITCH SENSOR STYLE
FIGURE 5-93. SWITCH SENSOR STYLE
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269