Loading Rolls On The Roll Holder - Canon imagePROGRAF GP-5300 Online Manual

Loading Rolls on the Roll Holder

When printing on roll paper, attach the roll paper to the roll holder.
Roll paper comes in two types: 2-inch and 3-inch cores. If using 3-inch core roll paper, attach the 3-inch
paper core attachment to the roll holder and holder stopper.
Caution
• • Set the roll on its side on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and
dropping a roll may cause injury.
Important
• When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. •
We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
• Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding •
problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
• Align the edges of the paper on both ends of the roll. This may cause feeding problems. •
• • If a feeding problem occurs, release the release lever and reload the roll paper.
Note
• For details on roll paper sizes and types that can be used, see •
List".
"Paper Sizes" or "Paper Information
83