Canon imagePROGRAF GP-5300 Online Manual page 112

Note
• If the Home screen does not appear, press the HOME button. •
2. 2. Tap Paper settings.
3. 3. Tap Advanced.
4. 4. Tap Cutting mode.
5. Tap User cut. 5.
6. When Do you want to set to detect the leading edge of the paper? is displayed, select 6.
Detect (recommended).
7. 7. Print the job.
The printer stops advancing the paper after printing.
8. 8. Tap Advance paper.
Roll paper is fed to the specified cut position and then automatically stopped.
9. Cut the roll paper manually with scissors or the like. 9.
10. Tap OK. 10.
After the roll is rewound, it stops automatically.
Paper cutting (to have the roll cut at your specified position)
1. Tap Feed/Cut on Home screen of operation panel. 1.
112