Canon imagePROGRAF GP-5300 Online Manual page 236

By flicking the touch screen, you can check various settings of wireless direct.
Note
• • The identifier (SSID) and password are specified automatically.
• By tapping Show password, you can check the password. The password is required when •
connecting a device to the printer. (Depending on the device you are using, no password is
required.)
• • By tapping Settings, you can change the following settings.
Enable/disable Wireless Direct
Update SSID/password
Wireless Direct network (SSID)
Connection request confirmation
For updating the SSID / password or changing the name of the printer displayed on Wi-Fi Direct
compatible device, see
Connecting Smartphone/Tablet to Printer
1. Turn on Wi-Fi communication on Wi-Fi Direct compatible device. 1.
For more on turning on Wi-Fi communication, see your device's instruction manual.
2. Select "DIRECT-XXXX-GP-NNNN" ("X" represents alphanumeric characters, NNNN 2.
means your printer model name.) from list displayed on device.
Note
• If "DIRECT-XXXX-GP-NNNN" does not appear on the list, wireless direct is not enabled. •
See Connect with Wireless Direct
• • You can change the name of the printer displayed on Wi-Fi Direct compatible devices.
See Change Wireless Direct Connection Setting
3. 3. Enter password on Wi-Fi Direct compatible device.
The device is connected to the printer.
Note
• You can check the password set for the printer by the following method. •
1. 1. On the HOME screen, tap
2. 2. Tap Wireless Direct.
3. 3. Tap Show password.
• • If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting
to the printer, the printer displays a confirmation screen asking if you allow the device to
connect to the printer.
Change Wireless Direct Connection
to enable wireless direct.
(Network).
236
Setting.
as necessary.