Canon imagePROGRAF GP-5300 Online Manual page 527

Standard
Prints with average speed and quality. Resolution settings depend on media type.
Fast
Gives priority to printing speed over print quality.
Custom
Opens the
Select this when you want to set the printing quality level individually.
Color Mode
Select the color to print.
Color
Prints with the number of colors in the document.
Monochrome
Print in grayscale.
Color Settings
Opens the
You can adjust individual color settings such as Cyan, Magenta, Yellow, Brightness,
and Contrast on the Color Adjustment tab, and select the Color Correction method on
the Matching tab.
Fluorescent Spot Color
Specify an area and print posters with bright colors.
To use fluorescent spot colors, add a checkmark.
Settings...
Opens the
Select the fluorescent spot color you want to use from the palette.
Thicken Fine Lines
To make thin lines thicker and easier to see when printing, add a checkmark.
Preview before printing
You can start up the Canon imagePROGRAF Preview, and check what the printing results will be
before executing the print.
Check this check box to display a preview before printing.
Edit fluorescent spot colors in PosterArtist
Start PosterArtist to edit fluorescent spot colors and check print results using the preview function.
To edit fluorescent spot colors in PosterArtist, add a checkmark.
Status Monitor...
Displays the status monitor.
Accounting...
Opens the Accounting dialog
By setting Accounting information, you add IDs to print jobs, and use the printer and cost management
tool to tabulate print history information for any ID.
Note
• To set accounting information, see
Custom dialog box.
Color Settings dialog
Set dialog box.
box.
"Setting Accounting
box.
Information."
527