Canon imagePROGRAF GP-5300 Online Manual page 168

◦ Enable/disable Wi-Fi ◦
Select Enable to wirelessly connect via wireless router.
◦ Wi-Fi setup ◦
Select how to setup Wi-Fi.
▪ Easy wireless connect ▪
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
▪ Manual connect ▪
Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
▪ WPS (Push button method) ▪
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected
Setup (WPS) push button method. Follow the on-screen instructions during setup.
▪ Other connection types ▪
▪ ▪ Manual connect (adv.)
Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.
▪ ▪ WPS (PIN code method)
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Note
• By tapping Advanced, you can set LAN in detail. •
For the items that can be set, see the following.
Advanced
• Wireless Direct •
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Connection
Network name (SSID)
Password
Communication mode
Channel
Wi-Fi security
IPv4 address
IPv4 subnet mask
IPv4 default gateway
Setting
Enable / Disable
DIRECT-XXXX-GP-NNNN*1
XXXXXXXXXX (10 characters)
Wireless Direct
3
WPA2-PSK (AES)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
168