Canon imagePROGRAF GP-5300 Online Manual page 91

• • When selecting Barcodes in Manage remaining roll amount and if the barcode is not
printed.
A menu for selection of the media type and length is shown on the operation panel. Operate the
operation panel, select the media type to be used, and enter its length.
Important
• • When selecting Enable in Keep media type, there is no need to specify the type of the paper.
• • Cut the edge of the roll using the Cut paper function if the edge is creased or soiled. (See
"Specifying the Cutting Method for
• When selecting the media type on the operation panel, make sure the media type set in the printer •
driver and the media type loaded on the printer match.
Note
• For details on media types that you can select, see "Paper Information List." •
8. Holding it at the positions indicated, close the roll paper cover. 8.
Note
• • Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors
or the blade after removing creased edges. (See
• Adjusting the print head alignment with the type of paper to be used in printing may enhance •
printing quality. (See
Rolls.")
"Automatic Adjustment to Straighten Lines and
91
"Specifying the Cutting Method for
Colors.")
Rolls.")