Back Panel Connectors - Viglen Vig560s Manual

Back Panel Connectors

The motherboard external IO connectors are attached to a metallic I/O shield. This
shield serves several purposes:
• It protects the sensitive motherboard from any external EMC interference.
• It stops the computer from interfering with other electrical devices.
• It allows the motherboard to be easily upgraded in the future without having to
resort to buying a whole new case. Simply change the I/O shield to match the
motherboard.
The I/O shield provides external access to PS/2 keyboard and mouse connectors as
well as one serial port, one parallel port, four USB ports, one LAN Port and the audio
connectors.
Note: Power to the computer should be turned off before a keyboard or mouse is
connected or disconnected.
(1) PS/2 Mouse Port (Green)
This port is for a PS/2 mouse
(2) Parallel Port
The 25-pin port connects a parallel printer, a scanner, or other devices.
(3) LAN (RJ-45) port
This port allows 10/100/1000 Mbps connection to a Local Area Network (LAN)
through a network hub.
Figure 3: Rear I/O Shield
Vig560s Motherboard Manual
15