Viglen Vig560s Manual page 71

Power On By Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set
to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and
RTC Alarm Second appear with set values. Configuration options:
[Disabled] [Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options:
[Disabled] [Enabled]
Note: The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first try.
Turning an external modem off and then back on while the computer is off causes an
initialisation string that turns the system power on.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options:
[Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options:
[Disabled] [Enabled]
Keyboard Wakeup Password
This item appears only when the Power On By PS/2 Keyboard is set to Enabled.
Select this item to set or change the keyboard wakeup password. The Keyboard
Wakeup Password item that appears below shows the default Not Installed. After
you have set a password, this item shows Installed Installed.
70
Vig560s Motherboard Manual