Table of Contents
Advertisement
2. Push each of the pins downward to secure the heatsink and fan assembly in
place.
3.
Rotate the push-pins clockwise to unlock the heatsink.
4.
When the fan and heatsink assembly is in place, connect the CPU fan cable to
the connector on the motherboard labelled CPU_FAN.
Note:
Do not forget to connect the CPU fan connector! Hardware monitoring errors
can occur if you fail to plug this connector.
Figure 22: Securing the Heatsink
Figure 23: Rotating the Push-Pins
Figure 24: CPU Fan Header
Vig560s Motherboard Manual
35
Advertisement
Table of Contents
