Table of Contents
Advertisement
CPU Fan Ratio [Auto]
Allows you to select the appropriate CPU fan speed ratio for the system. The default
[Auto] automatically selects the fan speed ratio when operating a low CPU
temperature. Select a higher ratio if you installed additional devices and the system
requires more ventilation. This item appears only when the CPU Q-Fan Control item
is Enabled. Configuration options:
[Auto] [90%] [80%] [70%] [60%]
CPU Target Temperature [xxx°C]
Allows you to set the CPU temperature threshold when the CPU fan speed is
increased to lower the CPU temperature. This item appears only when the CPU Q-
Fan Control item is Enabled. Configuration options:
[Auto] [53ºC] [56ºC] [59ºC] [62ºC] [65ºC] [68ºC] [71ºC] [74ºC] [77ºC] [80ºC] [83ºC]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the chassis fan
speed in rotations per minute (RPM). If the fan is not connected to the chassis, the
specific field shows N/A.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the
onboard voltage regulators.
Boot Menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
Figure 55: Boot Menu
72
Vig560s Motherboard Manual
Advertisement
Table of Contents
