Viglen Vig560s Manual page 65

DRAM RAS# Precharge [4 Clocks]
Controls the idle clocks after issuing a precharge command to the DDR SDRAM.
Configuration options:
[2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]
Controls the latency between the DDR SDRAM active command and the read/write
command. Configuration options:
[2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks]
DRAM RAS# Activate to Precharge Delay [15 Clocks]
Configuration options:
[4 Clocks] [5 Clocks] ~ [15 Clocks]
DRAM Burst Length [8]
Sets the DRAM Burst Length. Configuration options:
[4] [8]
Booting Graphic Adapter Priority [PCI/PCI Express]
Allows selection of the graphics controller to use as primary boot device.
Configuration options:
[Internal VGA] [PCI Express/Int-VGA] [PCI Express/PCI] [PCI/PCI Express]
[PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Allows user to select the amount of system memory pre-allocated by the internal
graphics device. Configuration options:
[Disabled] [Enabled, 1MB] [Enabled, 4MB] [Enabled, 8MB] [Enabled, 16MB]
[Enabled, 32MB]
VC1 for Azalia & Root Ports [Enabled]
Enables or disables the VC1 for the Azalia audio ports and other root ports.
Configuration options:
[Enabled] [Disabled]
64
Vig560s Motherboard Manual