Viglen Vig560s Manual page 52

1. Visit the Viglen FTP site (ftp://ftp.viglen.co.uk/files) and download the latest BIOS
file for the VIG560S motherboard. Save the BIOS file to a bootable floppy disk.
Note: Write the BIOS filename on a piece of paper. You need to type the exact
BIOS filename at the DOS prompt.
2. Copy the AFUDOS utility (afudos.exe) from the motherboard support CD to the
bootable floppy disk you created earlier.
3. Boot the system in DOS mode, then at the prompt type:
Where [filename] is the latest or the original BIOS file on the bootable floppy
disk.
4. The utility verifies the file and starts updating the BIOS.
CAUTION!
Do not shut down or reset the system while updating the BIOS to prevent system
boot failure!
5. The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
afudos /i[filename]
Figure 36: Typing the BIOS filename
Figure 37: Utility Updating the System BIOS
Figure 38: BIOS Update Complete
Vig560s Motherboard Manual
51