Table of Contents
Advertisement
Figure 48: CPU Configuration Sub-menu
Ratio CMOS Setting [8]
Sets the ratio between the CPU Core Clock and the Front Side Bus frequency. The
default value of this item is auto-detected by BIOS. Use the <+> or <-> keys to adjust
the values.
VID CMOS Setting [62]
Allows you to set the VID CMOS setting at which the processor is to run. The default
value of this item is auto-detected by BIOS. Use the <+> or <-> keys to adjust the
values.
Microcode Updation [Enabled]
Enables or disables microcode updation. Configuration options:
[Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Enable this item to boot legacy operating systems that cannot support CPUs with
extended CPUID functions. Configuration options:
[Disabled] [Enabled]
Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU's capability to enable
the C1E support. In C1E mode, the CPU power consumption is lower when idle.
Configuration options:
[Auto] [Disabled]
62
Vig560s Motherboard Manual
Advertisement
Table of Contents
