Motherboard Jumper Settings - Viglen Vig560s Manual

Motherboard Jumper Settings

Table 3: Clear CMOS Jumper Settings (CLRTC1)
Function Jumper
Default 1-2
Clear 2-3
CMOS
Note: Except when clearing the rtc ram, never remove the jumper on CLRTC1
default position. Removing the jumper will cause system boot failures.
Table 4: BIOS Write Protection
Jumper (
Function
Write Protect 2-3
Enabled
(default)
Write Protect 1-2
Disabled
Figure 4: Motherboard Jumper Settings
Configuration
The BIOS uses current configuration information and passwords for
booting.
Turn off the system and unplug the power cord. Move the jumper from
pins 1-2 (default) to pins 2-3 for about 5~10 seconds. Then move the
jumper back to pins 1-2.
Configuration
JP3)
Protects the BIOS from being written to.
Turn off the system and unplug the power cord. Move the jumper
from pins 1-2 (default) to ins 2-3. Reboot the system.
Vig560s Motherboard Manual
21