Back Panel Connectors - Viglen Vig710W Manual

Back Panel Connectors

The Motherboard external IO connectors are attached to a metallic I/O shield. This
shield serves several purposes:
•
It protects the sensitive Motherboard from any external EMC interference.
•
It stops the computer from interfering with other electrical devices.
•
It allows the Motherboard to be easily upgraded in the future without having to
resort to buying a whole new case. Simply change the I/O shield to match the
Motherboard.
 Power Jack –
the board can be powered through a 19 V DC connector on the back panel.
The back panel DC connector is compatible with a 7.4 mm/OD (outer diameter) and 5.1
mm/ID (inner diameter) plug, where the inner contact is +19 (±10%) V DC and the shell is
GND. The maximum current rating is 12 A.
 HDMI Port -
The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video
interface capable of transmitting uncompressed streams. HDMI supports all TV format,
including standard, enhanced, or high-definition video, plus multi-channel digital audio on a
single cable.
 USB 3.0 Ports -
mouse, or other USB compatible devices
 LAN Port -
The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN).
You can connect a network cable to it.
 USB 2.0 Ports -
mouse, or other USB compatible devices

Audio Ports -
These audio connectors are used for audio devices (MIC-IN, LINE-OUT).
Note:
The back panel audio line out connectors is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to
this output.
V1.0
Figure 4: Back Panel Connectors
The USB 3.0 ports are for attaching USB devices such as keyboard,
.
The USB 2.0 ports are for attaching USB devices such as keyboard,
.
Vig710W Motherboard Manual
14