Viglen Vig560s Manual page 29

USB Connectors (10-1 pin USB5/6 & USB7/8)
These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to
any of these connectors, and then install the module to a slot opening at the back of
the system chassis. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
Figure 11: USB Connectors
ATX Power Connectors (24-pin EATXPWR1 & 4-pin ATX12V1)
These connectors are for ATX power supply plugs. The plugs from the power supply
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
Figure 12: ATX Power Connectors
28
Vig560s Motherboard Manual