Table of Contents
Advertisement
5. Position the CPU over the socket, making sure that the gold triangle is on the
bottom-left corner of the socket. The socket alignment key should fit into the CPU
notch.
6. Close the load plate (A), then push the load lever (B) until it snaps into the
retention tab.
CAUTION!
The CPU fits in only one correct orientation. DO NOT force the CPU into the socket
to prevent bending the connectors on the socket and damaging the CPU!
Notes on Intel® Hyper-Threading Technology
• This motherboard supports Intel® Pentium® 4 CPUs in the 775-land package
with Hyper-Threading Technology.
• Hyper-Threading Technology is supported under Windows® XP and Linux 2.4.x
(kernel) and later versions only. Under Linux, use the Hyper-Threading compiler
to compile the code. If you are using any other operating systems, disable the
Figure19: Positioning the CPU
Figure 20: Closing the Load Plate
Vig560s Motherboard Manual
33
Advertisement
Table of Contents
