Viglen Vig560s Manual page 33

Note: Before installing the CPU, make sure that the cam box is facing towards you
and the load lever is on your left.
2. Press the load lever with your thumb (a), then move it to the left (b) until it is
released from the retention tab.
CAUTION!
To prevent damage to the socket pins, do not remove the PnP cap unless you are
installing a CPU.
3. List the load lever in the direction of the arrow to a 135° angle.
4. Lift the load plate with your thumb and forefinger to a 100º angle (A), then push
the PnP cap from the load plate window to remove (B).
Figure 16: Pressing the Load Lever
Figure 17: Lift the Load Lever
Figure 18: Lifting the Load Plate
Vig560s Motherboard Manual
32