Safety Light Grid Restart - Pilz PSEN op2H-SL Series Manual

PSEN op2H-SL Series
1
Transmitter
1
yel-
low
yel-
low
yel-
low

Safety light grid restart

a Disconnect the supply voltage from the safety light grid and reconnect it. The
restart [
Operating Manual PSEN op2H-SL Series
1004304-EN-01
2
EDM/3 RES
yel- yel-
low low
2 3
TX
yel-
low
yel-
low
yel-
low
yel-
low
11] begins.
Meaning
OSSD
PWR
Error in OSSDs.
Check the ambient conditions and the wir-
red green
ing.
Switch the safety light grid off and then on
again.
Supply voltage error.
Ensure that the supply voltage corresponds
to the information in the
details [
Meaning
PWR
Ready for operation
green
Internal error.
Check the ambient conditions and the wir-
green
ing.
Switch the safety light grid off and then on
again.
Error in the synchronisation of the light
beams.
green
Check the ambient conditions and the wir-
ing.
Switch the safety light grid off and then on
again.
Error in cascading.
Check the cascading and the wiring for the
green
cascading.
Error in restart function.
Check the ambient conditions and the wiring
green
for the start button.
Switch the safety light grid off and then on
again.
Technical
43].
automatic
40