Operating Mode; Normal Mode; Image Mode - Datalogic Lynx Instruction Manual
Hide thumbs
Also See for Lynx:
- Reference manual (169 pages) ,
- User manual (167 pages) ,
- Instruction manual (92 pages)
Table of Contents
Advertisement
2.6
OPERATING MODE
The following two commands carry out their specific function and then exit the
configuration environment.
Normal Mode
Image Mode
30
OPERATING MODE
The reader captures and decodes the
image. Then, it sends the data to the PC.
After reading this code the user must pull
the trigger to cause the reader to capture
the image and transfer it to the PC, via
XMODEM_1K
interface has been selected. Then, the
reader returns to Normal Mode.
protocol
if
the
RS232
Advertisement
Table of Contents
