Figure 4-10. Register Map; Figure 4-11. Register Read And Write Controls - Texas Instruments ADS1x48EVM User Manual

ADS1x48EVM GUI
As shown in Figure 4-10, the ADS1x48 devices have many configurable registers. Configure these registers by
using the drop-down menu and clickable options shown in the Field View menu on the right side of the GUI
window. The Field View menu replicates the register setting information provided in the
Reference these documents for additional information about or questions related to the specific ADC register
settings.
Instead of using the Field View menu, the 1's and 0's can also be double-clicked in the Bits menu to toggle the
bit settings. As the bit settings change, the Field View options also change to the corresponding register setting.
4.3.1 Register Read and Write Options
Figure 4-11 highlights the top of the Register Map window where reading from and writing to registers is
controlled. The default behavior has the Auto Read register function turned off as well as performs an
Immediately Write operation on the Config register when options change. All read and write options are
discussed in more detail in the next sections.
34 ADS1x48EVM Evaluation Module

Figure 4-10. Register Map

Figure 4-11. Register Read and Write Controls

Copyright © 2022 Texas Instruments Incorporated
ADS1x48 data
SBAU378A – SEPTEMBER 2021 – REVISED JANUARY 2022
Submit Document Feedback
www.ti.com
sheets.