Figure 4-4. File Menu - Texas Instruments ADS1x48EVM User Manual

ADS1x48EVM GUI
4.1.1 Menu Bar
The Menu bar across the top of the GUI displays the device name used on the EVM along with a number of
drop-down menu options.
4.1.1.1 File Menu
The File drop-down menu displays the available options shown in
• Program Device: Only necessary if an important firmware change is required
• Analysis Data:
– Save data: Save the Analysis Data to a comma-separated values (CSV) formatted file for further analysis
using external programs
– Load data: Loads a saved data file back into the GUI for further review or analysis
• Register Data
– Save register: Save the register data for a specific configuration
– Load register: Load a previously saved register map configuration
4.1.1.2 Options Menu
The Options drop-down provides a way to display the current COM port settings in a pop-up dialog with options
to change the COM port or reconfigure the settings as necessary.
4.1.1.3 Tools Menu
The Tools drop-down menu offers access to the Log pane that displays an activity log at the bottom of the GUI.
Clicking the book icon in the status ribbon displays the same information as selecting Log pane in the Tools
menu.
4.1.1.4 Help Menu
The Help drop-down menu displays the following options:
• E2E Support Forum links to the E2E forum in order to ask questions or search for answers
• View README.md displays pertinent start-up information not necessarily included in this guide
• About displays specific information regarding the GUI and EVM hardware to help confirm that the latest
version of the GUI is being used
30 ADS1x48EVM Evaluation Module

Figure 4-4. File Menu

Copyright © 2022 Texas Instruments Incorporated
Figure 4-4. These options include:
SBAU378A – SEPTEMBER 2021 – REVISED JANUARY 2022
www.ti.com
Submit Document Feedback