www.ti.com
The register map is shown in
4.3 Ship Mode
To go to Ship Mode, enable ship mode through an I
PB_LPRESS_ACTION bits as shown in
•
EN_RST_SHIP = 2b01 (Enable shipmode with wake on button press or adapter insert)
•
PB_PRESS_ACTION = 2b10 (Enable shipmode)
Enter ship mode by removing VIN if setting EN_RST_SHIP to 2b01. If setting PB_LPRESS_ACTION to 2b10 to
enable shipmode, hold the TS/MR button for the configured t
You will know you are in Ship Mode as the voltage on the SYS (SC#2) will fall to 0 V.
SLUUCH5B – AUGUST 2021 – REVISED FEBRUARY 2022
Submit Document Feedback
Figure
4-5.
Figure 4-5. Register Map
2
C transaction to set EN_SHIP_RST bits or the
Figure
4-6:
Figure 4-6. SHIP_RST Register
Copyright © 2022 Texas Instruments Incorporated
then remove VIN.
LPRESS
Testing Procedures
BQ25180 EVM User's Guide
9