Table of Contents
Advertisement
www.ti.com
3 OPTEVM Software
This section describes the installation and operation of the OPTEVM software. An OPTEVM uses the TI Latte
software, which is available for download on the EVM page.
3.1 Hardware Requirements
The OPTEVM software has been tested on the Windows 10
settings. The software functions correctly on other Windows XP, Windows Vista, Windows 7 and Windows 8.
3.2 Software Installation
The OPTEVM software is available through the light sensor IC Product Folder on the TI web site (www.ti.com).
The product folder is named corresponding to the specific device part number. To install the software to your
computer, navigate to the OPTEVM software. For example, the OPT4001DTS IC is called OPT4001DTSEVM.
Open the installer directory. Launch the installation file, for example: OPT4001DTS_EVM_Latte.exe, as shown in
the figure below.
The OPTEVM software then begins the installation process, as shown in
Follow the prompts as shown in
SBOU293D – NOVEMBER 2022 – REVISED JANUARY 2024
Submit Document Feedback
Figure 3-1. OPT3004DTSEVM Software-Installation File
Figure 3-2. OPTEVM Software-Installation Launch
Figure 3-3
to
Figure 3-8
Copyright © 2024 Texas Instruments Incorporated
®
operating system (OS) with United States regional
Figure
3-2.
to install the OPTEVM software.
OPTEVM Software
Light Sensor Evaluation Modules
5
Advertisement
Table of Contents
