Table of Contents
Advertisement
Operating the DLPLCRC910EVM
5.2.1 Menu Bar
The DLPLCRC910EVM Menu bar consists of three items:
1. File Menu
Script items
•
New Script empties the Script sub-window to record a new script.
•
Open Script opens a dialogue box to select an existing script from the disk.
•
Save Script saves the current contents of the Script sub-window to the current script file. If the file is not
yet saved the save as dialogue opens.
•
Save Script As opens a dialogue box to save the current script with a new name.
Log items
•
New Log empties the Status sub-window to record a new command log sequence.
•
Open Log opens a dialogue box to select an existing command log sequence file from the disk.
•
Save Log saves the current contents of the Status sub-window to the current script file. If the file is not
yet saved the save as dialogue opens.
•
Save Log As opens a dialogue box to save the current command log sequence with a new name.
2. Control Menu
•
DLPC910 Control displays the
•
Apps FPGA Control displays the
3. Help Menu
About DLP® LightCrafter DLPC910 GUI displays the Software Version, USB DLL Version, and USB FW
Version information box:
24
DLP® LightCrafter™ DLPC910 Evaluation Module (EVM)
Figure 5-3. File Menu
Figure 5-4. Control Menu
DLPC910 Register Control
Apps FPGA Registers
page.
Figure 5-5. Help Menu
Copyright © 2023 Texas Instruments Incorporated
page.
www.ti.com
DLPU124 – JUNE 2023
Submit Document Feedback
Advertisement
Table of Contents
