Installing A New Host Adapter After Windows Xp Is Already Installed - IBM Adaptec Ultra320 SCSI User Manual

IBM Ultra320 SCSI Controller 2 User's Guide
Installing a New Host Adapter after
Windows XP is Already Installed
To install a new host adapter if Windows XP is already installed:
1 Start Windows XP.
Windows XP will automatically discover the new hardware and
load the built-in driver. Let Windows XP complete the
hardware detection and manually update the Adaptec Ultra320
driver afterward.
2 Select the option, Install from a list or specific location
(Advanced), then select Next.
3 When prompted, insert the Ultra320 FMS driver floppy disk for
Windows XP into your floppy disk drive. Select the Include
this location in the search option.
4 Type the following and click Next:
a:\winxp
If you are installing on an IA-64 class system, type the following
and click Next:
a:\winxp64
5 You may get a warning that a Digital Signature was not found.
Check Adaptec's Web site periodically for updated drivers with
the Digital Signature. Click Continue Anyway.
6 After completing the installation, select Finish.
7 You may be prompted to restart the computer. Select Yes.
8 If you are installing a dual channel adapter, the Found New
Hardware Wizard will restart. Select the Install the software
automatically option and follow the instructions.
9 You may be prompted to restart the computer. Select Yes.
6-4