Display/Update Line Adapters; Ess; Moss - IBM 3745 Series Service Functions

Display LA
Display/Update Line Adapters
When you modify an LA configuration, you must:
1. Ensure the control program has a sysgen supporting the hardware configuration changes.
2. Deactivate the lines of the LA (via a network operator command).
3. For LA, MUX, EXTEND changes, disconnect the LA via TSS services.
4. Turn OFF (via
pas
services) the power supplies of the hardware elements to be modified.
5. Change the hardware configuration.
6. Turn ON (via
pas
services) the power supplies of the modified hardware elements.
7. Perform the CDF display/update function.
8. IML the LA (via TSS services).
9. Connect the LA (via TSS services).
10. Activate the lines of the LA (via a network operator command).
1. You must be in the CDF display/update func-
tion (see page 9-15).
2. In
D,
enter 7.
3. Press
SEND.
Screen
m
is displayed.
Display LA
1. Enter the LA number in
D.
2. Press
SEND.
Depending on the status, or type
of LA, one of the screens
m
to
m
is dis-
played.
The LA can be:
TRSS
HPTSS
ESS
RSRVD
TSS
LA number 1, 2, 5, or 6
LA number 1 to 8
LA number 1 to 8. This is displayed
only if an ESS adapter is sensed by the
MOSS.
Reserved value
LA number 1 to 32
You may obtain the LA number by displaying the
port number (see "Display/Update Ports" on
page 9-40).
CDF - DISPLAY/UPDATE FUNCTION
SELECT ONE OPTION
DISPLAY:
J = MOSS
2 = LSSD
3 =
FRA~!ES
4 = CCU
5 = SWITCH
===>
0
Fl :END
F3:ALAR~1
(1 TO 9). THEN PRESS SEND
DISPLAY/UPDATE:
7 • LINE ADAPTERS (LA)
8 = "OK1 S
9 = CCU OPERATING
~10DE
F6:QUIT
Figure 9-49. CDF Display/Update Menu Screen
III
COF - DISPLAY/UPDATE:
.UIW",')U;fi
NU~IBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Y N N N N N N N N PRESENCE : Y
LA TYPE': 3 1 - - - - - -
NU~IBER : 17 18 19 29 21 22 23 24 25 26 27 28 29 39 31 32
PRE SEtlCE : N N N N N N N N N N N N N N N N
LA TYPE': - - - - - -
*
LINE ADAPTER TYPE
: I=TSS. 2=HPTSS. 3=TRSS, 4=RSRVD, 5=ESS
- TO DISPLAY/UPDATE LA, SELECT ITS NUM8ER (1-32), THEN PRESS SEND ==>
0
FJ :END F3:ALARM f6:QUIT
Figure 9-50. CDF Display/Update (Line Adapters)
The 32 LAs are arranged as follows:
LA Number LA Board Frame
1 to 8 1 3745
9 to 16 2 3746-A11
17 to 24
3
3746-A11
25 to 32 4 3746-A12
Chapter 9. Configuration Data File (CDF)
9-29