Installing The Driver When Windows Nt 4.0 Is Already Installed; Updating Windows - IBM Adaptec Ultra320 SCSI User Manual

IBM Ultra320 SCSI Controller 2 User's Guide
Installing the Driver When Windows NT 4.0 is
Already Installed
To update or install the
already installed, follow the instructions below for the version of
Windows NT 4.0 you are installing.
Updating Windows NT 4.0
1 Start Windows NT 4.0.
2 Click the Start button on the Windows NT 4.0 task bar, and then
point to Settings.
3 Click the Control Panel.
4 Double-click the SCSI Adapters icon.
5 Click the Drivers tab, and then click the Add button.
6 In the Install Driver window, click the Have Disk button.
7 Insert the Ultra320 FMS driver floppy disk for Windows NT 4.0
into your floppy disk drive and press Enter. Enter the following
path to the installation files and click OK:
a:\winnt40
8 In the Install Driver window, select the Adaptec Ultra320 driver
from the list and click OK.
9 You must restart your computer for the changes to take affect.
Click Yes to restart your computer. Click No to return to the
SCSI Adapters window.
5-4
driver if Windows NT 4.0 is
adpu320m.sys