IBM Adaptec Ultra320 SCSI User Manual page 90

Installing Windows XP (64-bit)
Note: You will need to modify the Adaptec Ultra320 driver
disk for Windows XP in order to properly install Windows XP
64-bit Edition
1 On the disk, rename the
something like
from the
\WINXP64\
Note: If you want to use this disk for installation of
Windows NT4, Windows 2000 or Window XP (32-bit) in
the future, the previous
be restored.
2 Start your system with the Windows XP CD in the CD-ROM
drive. Be sure to choose the CD-ROM boot option if working
with an EFI BIOS.
3 Press F6 when this message is displayed:
Press F6 if you need to install a third-party SCSI or RAID driver...
4 When prompted, insert the Ultra320 FMS driver floppy disk for
Windows XP into drive
5 You are presented with a selection of driver choices. Select
Adaptec Ultra320 SCSI Cards (WinXP
6 If you have no other controllers to add, press Enter to continue
with the Windows XP installation.
7 You will need to restart your computer to finish setting up the
operating system.
Note: When booting on an IA-64 system with an EFI BIOS, be
sure to select the Microsoft Windows XP 64-bit Edition
option to continue installing the operating system.
TXTSETUP.OEM
, and copy the
TXTSETUP.I32
directory to the root directory.
TXTSETUP.OEM
, and continue.
A
Installing Windows XP
on the root directory to
TXTSETUP.OEM
file will need to
, and press Enter.
IA64)
file
6-3