IBM Adaptec Ultra320 SCSI User Manual page 63

IBM Ultra320 SCSI Controller 2 User's Guide
From the Configuration menu, you can access the following
settings:
Boot Device Configuration
SCSI Device Configuration
Advanced Configuration Options
If you select Boot Device Configuration, the Boot Device
Configuration menu appears. The non-BBS version is shown as
follows. This menu displays and provides menu options for
setting Master SCSI Controller, Boot SCSI Controller, Boot
SCSI ID, and Boot LUN Number.
Single Image
Select Master SCSI Controller........................29320ALP A at slot 6, 00:0E:00
Select SCSI peripheral from which to boot
Boot SCSI Controller......................................29320ALP A at slot 6, 00:0E:00
Boot SCSI ID..................................................0
Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled.
Boot LUN Number..........................................0
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * = default)
The BBS version of the Boot Device Configuration menu is
shown as follows. This menu displays the Select Master SCSI
Controller option only.
Single Image
Select Master SCSI Controller..............................29320ALP A at slot 6, 00:0E:00
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * = default)
3-12
Adaptec SCSISelect(TM)
Boot Device Configuration
SCSI Device Configuration
Adaptec SCSISelect(TM)
Boot Device Configuration
SCSI Device Configuration
Utility v4.10.0
Utility v4.10.0