Using Netware And The Host Adapter - IBM Adaptec Ultra320 SCSI User Manual

IBM Ultra320 SCSI Controller 2 User's Guide

Using NetWare and the Host Adapter

This section contains useful information on using NetWare and
your host adapter.
Using Removable Media
The
adpu320.ham
disk drives, including magneto-optical drives. Removable media is
treated as a standard SCSI hard disk, with some exceptions:
The driver recognizes and registers only media with
512 bytes/sector.
NetWare allows you to mount/dismount the media and to
lock/unlock the media.
NetWare's
monitor.nlm
options. To view and configure these options:
1 Load
monitor.nlm
2 Select Disk Information. All system disk drives appear.
3 Select the removable-media device. The following drive status
items appear:
Menu Choice
1. Volume Segments On Drive
2. Read After Write Verify
3. Drive Light Status
4. Driver Operating Status
5. Removable Drive Mount Status
6. Removable Drive Lock Status
1
Valid for both removable and nonremovable types of SCSI disk drives.
2
Valid for removable media only.
7-8
driver module fully supports removable-media
program supports several removable-media
to display the various options.
1
1
1
1
Default Value
(select for list)
Hardware Level
Not Supported
Active
Mounted
2
2 Not Locked