IBM Adaptec Ultra320 SCSI User Manual page 98

NetWare 5.0
Follow these instructions only if you are installing NetWare 5.0 for
the first time:
1 Begin installation of NetWare 5.0 on your server as instructed in
your NetWare documentation.
2 When a screen appears that asks you to add device drivers,
select Modify and press Enter.
3 Select Storage adapters and press Enter.
4 Press Insert to add storage drivers.
5 Press Insert to add an unlisted driver.
6 Insert the Ultra320 FMS driver floppy disk for NetWare into
your floppy disk drive.
7 Press F3 and type a:netware\v42_v50 as the path to the
adpu320.ham
8 Select adpu320.ham and press Enter.
9 Select Return to driver list and press Enter.
10 To install additional adapters, follow the procedures from
Step 4.
11 When complete, select Continue to complete the installation.
NetWare 5.1 and 6.0
Follow these instructions only if you are installing NetWare 5.1 and
6.0 for the first time:
1 Begin installation of NetWare 5.0/6.0 on your server as
instructed in your NetWare documentation.
2 When a screen appears that asks you to add device drivers,
select Modify and press Enter.
3 Select Storage adapters and press Enter.
4 Press Insert to add storage drivers.
5 Press Insert to add an unlisted driver.
driver for NetWare.
Installing Novell NetWare
7-3