Installing The Driver When Netware Is Already Installed - IBM Adaptec Ultra320 SCSI User Manual

IBM Ultra320 SCSI Controller 2 User's Guide
6 Insert the Ultra320 FMS driver floppy disk for NetWare into
your floppy disk drive.
7 Press F3 and type a:\fmsimage\fms41\netware\v51_v60
as the path to the
8 Select adpu320.ham and press Enter.
9 Select Return to driver list and press Enter.
10 To install additional adapters, follow the procedures from
Step 4.
11 When complete, select Continue to complete the installation.
Installing the Driver When NetWare is Already
Installed
To update or install the
already installed, follow the instructions in this section. The
procedures are similar for all versions of NetWare. Procedures that
are specific to a NetWare version are noted when necessary.
1 Make a backup copy of the old driver (if it exists) before
installing the new driver.
2 Copy the
adpu320.ham
floppy disk for NetWare into the server's startup directory (for
example, c:\nwserver, c:\server.40) on your hard disk. This
overwrites any existing version of the driver in the directory.
Note: For NetWare 4.2 and 5.0, the file is in
\netware\v42_50. For NetWare 5.1 and 6.0, the file is in
\netware\v51_60
7-4
driver for NetWare.
adpu320.ham
adpu320.ham
driver from the Ultra320 FMS driver
driver when NetWare is